Description
Clemco Blast Machine System 1648-300-CA
With 1-1/4” piping 16” diameter Flat Sand Valve
Clemco Classic Blast Machine Model 1648 HP Package is a High Pressure Breathing Air System, Portable, 3 cuft – 300lbs., with 1-1/4 inch Piping.
The 3 cuft HP classic blast machine holds 3 cubic foot (approximately 300 lbs.) of abrasive blast media. This portable blast machine has 1-1/4” piping and comes with a Flat Sand Valve (FSV) and remote control system. Using a No. 5 (5/16-inch) blast nozzle will provide approximately 15 minutes of productive blasting at 80 psi.
Flat Sand Valve
The included manually-operated FSV can be used with expandable mineral and slag abrasives, as well as plastic media. However, the FSV does not work well with metallic media
Remote Controls
The included TLR-100 remote controls are not equipped with an Automatic Cutoff Switch (ACS).
Clemco Blast Package Details
The included high pressure (HP) breathing air package provides everything necessary to begin blasting with an air compressor (to be used with the included HP respirator).
Includes
- TLR-300 remote controls (includes 10565 RLX handle) 01936
- Abrasive metering valve FSV 02427
- 50 ft. X 1-1/4” ID blast hose, coupled 23481
- NHP-2 Nylon nozzle holder (included in 23481) 04127
- CQPS-2 nylon quick coupling (included in 23481) 08413
- Blast hose safety cable 15013
- 1-1/2” Air filter with manual drain 22363
- TXP-6 blast nozzle 23525
- Blast machine screen (optional steel cover) 03099 (02335)
- Poly all-weather cover 15097
- Nylon tie (eight included with system) 02195 (each)
- Apollo 600 HP DLX helmet with Clem-Cool 25194
- 50 ft respirator hose 04415
- CPF-20 Breathing air filter with regulator 03578
- One pair leather gloves 02243
- One 25-pack helmet outer lens 04361
- One 5-pack Apollo 600 intermediate lens 24943
- Two 10-packs quick coupling gaskets 08853 & 00850
- One 10-pack nozzle washers 91026
- Abrasive trap screens (six included in system) 02012 (each)
The FSV, an original Clemco design, is the triedand-true work horse of the industry. It is among the most imitated Clemco components. It is standard on machines from 2-cubic feet to 20-cubic feet capacity
(-) FSV metering valve, complete ………………02427
1. Upper body ………………..02422
2. Valve …………………………02423
3. Gasket, rubber, 2 required ……………..02424
4. Disc-stainless ……………..02425
5. Lower body ………………..02426
6. Metering handle, heavy duty …………….20498
7. Cap screw, 1/4-NC x 1-1/4” hex head …..03054
8. Wing nut, 1/4-NC …………03113
9. Handle bolt spacer……….02431
10. Valve handle pin ………….20246
11. Gauge unit …………………02433
12. Set screw, 1/4-NC x 1/2” square head …03080
13. Spring, compression ……01982
14. Stud …………………………..02436
15. Packing gland …………….02437
16. O-ring, 7/8” OD …………..21165
17. Gasket, shaft ………………02439
18. Inspection plate …………..02440
19. Cap screw 5/16-NC x 1” hex head ……….03152
20. Wing nut, 5/16-NC ………03213
21. O-ring …………………………01990
22. Nipple, 1-1/2” x close …..01791
23. Wye, standard 1-1/4” …..01818
24. Nipple, 1-1/4” x 5” ……….01721
25. Nut, 1/2-NC hex ………….03511
26. Cap screw, 1/2-NC x 1-3/4” hex head …..03455
27. Washer, 1/4” flat ………….03116
28. Hitch pin …………………….20245
Reviews
There are no reviews yet.